The U.S. Department of Transportation’s proposed four-year, $302 billion transportation bill includes a new rule that drivers be paid for the time they’re detained at shipper’s and receiver’s facilities.
The
Grow America Act, released by the White House on April 29, states that the Secretary of Transportation may require motor carrier employers to:
Track the on-duty (not driving) time of an employee whose base compensation is calculated in a manner other than an hourly wage, and separately compensate the employee for any on-duty, not-driving period at an hourly rate not less than the federal minimum wage.
In a separate analysis of the bill, the DOT explains that drivers are frequently detained for extended periods at shipper or receiver facilities and are on duty but not compensated. According to the analysis:
This situation often results in pressure for drivers to drive beyond the federal hours of services limit as a matter of economic necessity, risking driver fatigue and jeopardizing highway safety. FMCSA believes that safety could be significantly increased if drivers were compensated for these waiting periods.
What do you think? Should drivers be compensated for time they’re detained? And, just as importantly, who should foot the bill? The current proposal states that drivers should be paid by the motor carrier employer, but says nothing about charging the shipper or receiver who may have caused the delay.
Freightliner’s Team Run Smart is partnering with DAT to offer a special on the TruckersEdge load board to its members. Sign up for TruckersEdge today and get your first 30 days free by signing up at www.truckersedge.net/promo717 or entering “promo717” during sign up.
* This offer is available to new TruckersEdge subscribers only
About TruckersEdge®, powered by DAT®
TruckersEdge® Load Board is part of the trusted DAT® Load Board Network. DAT offers more than 68 million live loads and trucks per year. Tens of thousands of loads per day are found first or exclusively on the DAT Network through TruckersEdge.
Note: This article was adapted from DAT’s blog post on www.DAT.com.